Search for:

Why Leave A Gripper Landing Area In Cosmetic Sample Approval

A gripper needs a dependable area to hold a part while it is moved or positioned. Leaving that area outside the artwork can keep a jaw, pad or suction cup from marking a visible print or coating. It can also help make contact more consistent when a decorative layer would change the surface texture. The blank area should be based on the actual grip path.

Check the full contact envelope

Mark where the tool touches the part as it approaches, grips and releases. Include normal variation in the part and in its location in the fixture. A mark just outside the nominal jaw position may come from contact while the part is moving. Compare parts before and after the handling step under the same light and look for a matching mark on the fixture or pad.

Agree on the protected zone before approving artwork

Use a shared drawing or marked sample to show the no-decoration zone. If the design needs decoration there, review whether a different grip point, a suitable pad or a later decoration step can work. Try the chosen setup on finished parts. A blank area alone cannot prevent marks if the contact pressure, motion or pad condition changes.

A2dad28f8bdd5be5b2b4a795e14b7e66

Packaging sample showroom of SamBound New Material Technology Company Ltd. Company information: sambound.com.

Home


SamBound New Material Technology Company Ltd.

Leave A Comment

All fields marked with an asterisk (*) are required